NOTES - CONTINUED:
8. FINAL DRIVE GEARBOX. Each 250 hours check
level. Change gear lubricant only when required by
other foreign material. After refill, operate for 5 minutes,
check for leaks and bring oil level to fill and level plug
9. HYDRAULIC TANK AND TANK STRAINER. Each
1000 hours drain tank, remove and clean tank strainer.
Refill tank, operate Paver for 5 minutes, check for leaks,
check oil level and bring to "FULL" mark.
10. HYDRAULIC OIL FILTER.
Each 500 hours,
remove element, clean filter shell and install new
element. After replacement, operate hydraulic system
for 5 minutes, check for leaks, check level and bring to
Each 500 hours apply GAA
Copy of this Lubrication Order will remain with the
sparingly to the breaker cam and apply OEIHDO to the
equipment at all times, instructions contained herein are
camwick and breaker arm pivot point.
12. DRIVE CHAINS. Each 500 hours clean and lightly
By order of the Secretary of the Army:
coat chains with OE/HDO.
JOHN A. WICKHAM, JR.
13. CRAWLER ROLLERS. Lubricate rollers each 2
General, United States Army
hours when traveling from work site to work site.
Chief of Staff
14. LUBRICANTS. The following
is a list
with military symbols and applicable specification
ROBERT M. JOYCE
Major General, United States Army
The Adjutant General
(SD), Type II
To be distributed in accordance with DA Form 12-
25B, Operator and Organizational maintenance
requirements for Paving Machines.
US. GOVERNMENT PRINTING OFFICE: 1984-420-903/262
CARD 6 OF 6