(6) Place a 19 mm socket on integral nut of
crank pulley (12). Place a 22 mm wrench on
magneto nut (13). Loosen crank pulley
integral nut completely and remove crank
Dry cleaning solvent P-D-680 is TOXIC and flammable. Wear protective goggles and gloves and use in
well ventilated area. Avoid contact with skin, eyes, and clothes, and do not breathe vapors. Do not use
near open flame or excessive heat. The flashpoint 100 140 degrees F (38 60 degrees C). If you become
dizzy while using cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes is
made, wash your eyes with water and get medical aid immediately.
(1) Clean all parts with dry cleaning solvent P-D-680 and dry with rag.
(2) Inspect all parts for wear and other damage. Replace damaged parts.