The starter spring will develop extreme
tension during winding. Use extreme
caution. Wear eye protection and gloves.
Personal injury may result.
There is enough clearance between starter
pulley and starter case to permit unwinding
of undesired turns of starter rope.
(8) Pull starter rope (9) all the way out and
adjust tension by turning pulley (10) one or
two turns CCW without winding rope. Hold
pulley in position.
Install dog spring (11) and dog (12) as noted
(10) Install retainer spring (13) and retainer (14)
so slot in retainer fits over dog (12). Install
center screw (1.5).
Installation. Install starter assembly (2) with
screws (1). Tighten screws 26 lb-ft (35 N.m).
Follow-on Maintenance: Install magneto
cover (para 4-20).
END OF TASK