This task covers:
Tool Kit, General Mechanic's: Automotive
Rag, wiping: item 4, Appendix E
(1) Using 10 mm wrench, remove three nuts (1)
from air cleaner cover (2).
(2) Remove air cleaner cover (2) by lifting
upward and gently prying with a flat blade
screwdriver, if necessary.
(1) Remove element case (3).
handled and disposed of only by authorized
and trained personnel. The unit
commander or senior officer in charge of
maintenance personnel must ensure that
prescribed protective clothing (FM 3-4) is
used, and prescribed safety measures and
decontamination procedures (FM 3-5) are
followed. The local unit SOP is
responsible for final disposal of
contaminated air filters. Failure to comply
may cause severe injury or death to
(2) Remove air cleaner element (4).
(3) Remove air fitting (5) and suction pipe (6).