TM 5-3820-246-14&P
C.
and ensure that grip (14) is in good electrical
contact with coil wire. Replace any part failing
test.
d. Installation.
(1) If removed, install grip (14) in spark plug
cap (11) and secure with tiedown strap (13).
(2) Install TCI unit (4) lockwasher (10), and
screw (9).
Install ignition coil (8), with shoulder down,
(3)
Tighten screws 72 lb-in (8.5 N-m).
Install connecting wire (3) to ignition coil
(4)
(8) with screw (5).
Connect spade connector end of connecting
(5)
wire (3) to TCI unit (4).
NOTE
Make sure connecting wire is secured by a
clamp.
(6) Install two clamps (2) and two screws (1). Tighten screws 36 lb-in (4.1 N-m).
(7) Install spark plug (12) and spark plug cap (11).
NOTE
Follow-on maintenance: Install magneto
4-20).
END OF TASK
4-42