TM 5-3820-246-14&P
e.
Installation.
(1) Install carburetor gasket (12), plate (13), and carburetor gasket (11).
(2) Install carburetor box (7), three collars (10) and three locknuts (9).
(3) Install throttle rod (8) on carburetor (2).
NOTE
Align holes in gaskets and spacer with holes in carburetor box.
(4) Install gasket (5), spacer (6), gasket (4), and pipe joint (3) on carburetor box (7).
(5) Install carburetor (2) and attach pipe joint (3) to carburetor,
(6) Install two locknuts (1) and tighten to 14 lb-in (1.6 N.m).
NOTE
Follow-on maintenance:
Install operator handle (para 4-16).
Install air cleaner (para 4-18).
Perform carburetor adjustments (para 4-17).
END OF TASK
5-27