5-6. PRIMER ASSEMBLY MAINTENANCE INSTRUCTIONS - Continued
Install plunger (5), pushing stem down through
gear cover, with cone end to the inside of the
Coat threads of plunger stem with loctite, or simi-
lar adhesive, and thread Handle (6) onto the
stem. Push down on the plunger cone until the
spring (1) is compressed solid, and immediately
thread handle (6) to provide distance A, as re-
corded in step 2.
Apply loctite to lock plate (7) and install in cross
slot in end of plunger (5) stem. Install primer
cap (8) over the lock plate and end of handle (6).
Check measurement A, as instructed in step 2.
Follow-on tasks include: Install gear cover