3-6. AIR CLEANER MAINTENANCE INSTRUCTIONS - Continued
Position the cover (2) on the pot (3) and secure
with wing nut (1). Tighten the wing nut sufficiently
to snug the cover to the pot without deforming the
Install the pot (3), aligning the four legs with holes
in flange of intake ring (4). Seat the legs fully into
the pedestals of the base ring (5)
Position intake ring (4) over base ring (5), align-
ing the holes in flange of intake ring with the four
pedestals of the base ring.
Wipe dust from top surfaces of the base ring (5).
Lift off the air intake ring (4)
Lift off the pot (3).
Remove wing nut (1) and lift off cover (2)
While supporting the air cleaner cup (1), release
the two retaining clips (2). Lower the cup with ele-
ment (3) from the air cleaner housing (4).
Remove the element (3) from the cup (1) and
empty the cup of any accumulated dirt or dust.
Discard the used element.
Position new element (3) into the cup (1), ensur-
ing that the element is centered and seats well in
Position the cup (1) with element (3) under the air
cleaner housing (4) and secure with the two re-
taining clips (2).