LO 5-3895-373-12
OBSERVE THE FOLLOWING
WARNING
Hydraulic oil, engine oil, lubricating oil, and grease can be moderately flammable
and can be an irritant to the skin, eyes, and respiratory system. Avoid prolonged
exposure. Eye protection and rubber gloves must be worn when working with
hydraulic oil.
NEVER use the wrong type of oil or grease.
NEVER use too much grease
NEVER overfill hydraulic oil or engine oil.
WARNING
Cleaning solvent, P-D-680, Type ill, is TOXIC and flammable. Wear protective
goggles and gloves. Use only in a well ventilated area. Avoid contact with skin,
eyes, and clothes, and do not breathe vapors. Keep away from heat or flame.
Never smoke when using solvent; the flashpoint for Type III cleaning solvent is
200F (93,30C). Failure to do so may result in injury or death to personnel.
ALWAYS clean lubrication fittings, control screws, guide indicator rod, chains,
and drain and fill plugs with cleaning solvent, Type III, and dry before
lubricating.
WARNING
Hydraulic fitting sealant, pipe sealant, and thread locking compound can cause eye
damage or skin irritation. Wash after skin contact. Wear safety goggles/glasses
when using. Avoid contact with eyes or skin. If sealant contacts eyes, flush eyes
with water and get immediate medical attention.
ALWAYS use sealants and locking compounds as directed to prevent leaks.
ALWAYS use Lubrication Order.
Card 2 of 28
