TM 5-3820-246-14&P
Table 4-3. Unit Troubleshooting Procedures CONT.
Malfunction
Test or Inspection
Corrective Action
ENGINE
7 . ENGINE RUNS BUT TOOL ACTION IS WEAK.
Check that tool shaft (1) is properly engaged with tool holder (2) (para 2-8c).
Step 1.
Step 2.
Visually check tip of tool (3) for wear or bluntness.
Replace tool (para 2-8c~).
Step 3.
Visually check tool for bent or cracked shaft.
Replace tool (para 2-8c~).
4-18