TM 5-3895-376-14&P
(3) Items that are included in kits and sets are
listed below the name of the kit or set on Figure KIT.
(4) Spare/repair parts that make up an assem-
bled item are listed immediately following the assem-
bled item line entry.
(5) Part numbers for bulk materials are refer-
enced in this column in the line item entry for the item
to be manufactured/fabricated.
(6) When the item is not used with all serial num-
bers of the same model, the effective serial numbers
are shown on the last line(s) of the description (before
UOC). Not applicable.
(7) The usable on code, when applicable (see
paragraph 5, Special information).
(8) In the Special Tools List section, the basis of
issue (BOI) appears as the last line(s) in the entry for
each special tool, special TMDE, and other special
support equipment. When density of equipments sup-
ported exceeds density spread indicated in the basis
of issue, the total authorization is increased propor-
tionately.
(9) The statement “END OF FIGURE” appears
just below the last item description in Column 5 for a
given figure in both Section II and Section III.
f. QTY (Column (6)). The QYT (quantity per figure
column) indicates the quantity of the item used in the
breakout shown on the illustration figure, which is pre-
pared for a functional group, subfunctional group, or
an assembly. A “V” appearing in this column in lieu of
a quantity indicates that the quantity is variable and
the quantity may vary from application to application.
C-4. Explanation of Columns (Section IV).
a. NATIONAL STOCK NUMBER (NSN) INDEX.
(1) STOCK NUMBER column. This column lists
the NSN by National item identification number (NIIN)
sequence. The NIIN consists of the last nine digits of
NSN
the NSN (i.e., 5305-01-674-1467). When using this
column locate an item, ignore the first 4 digits of the
NSN. However, the complete NSN should be used
when ordering items by stock number.
(2) FIG. column. This column lists the number
of the Figure where the item is identified/located. The
figures are in numerical order in Section II and Sec-
tion III.
(3) ITEM column. The item number identifies
the item associated with the figure listed in the adja-
cent FIG. column. This item is also identified by the
NSN listed on the same line.
b. PART NUMBER INDEX. Part numbers in this
index are listed by part number in ascending alphanu-
meric sequence (i.e., vertical arrangement of letter
and number combination which places the first letter
or digit of each group in order A through Z, followed
by the numbers 0 through 9 and each following letter
or digit in like order).
(1) CAGEC column. The Commercial And Gov-
ernment Entity (CAGE) Code (C) is a 5-digit alphanu-
meric code used to identify the manufacturer,
distributor, or Government agency, etc., that supplies
the item.
(2) PART NUMBER column. Indicates the pri-
mary number used by the manufacturer (individual,
firm, corporation, or Government activity), which con-
trols the design and characteristics of the item by
means of its engineering drawings, specifications,
standards, and inspection requirements to identify an
item or range of items.
(3) STOCK NUMBER column. This column lists
the NSN for the associated part number and manufac-
turer identified in the PART NUMBER and CAGEC
columns to the left.
(4) FIG. column. This column lists the number
of the figure where the item is identified/located in
Section II and III.
(5) lTEM column. The item number is that num-
ber assigned to the item as it appears in the figure ref-
erenced in the adjacent figure number column.
c. FIGURE AND ITEM NUMBER INDEX.
(1) FIG. column. This column lists the number
of the figure where the item is identified/located in
Section II and III.
C-4
