VI.
Instructions for using "odd size can and carton adapter".
1.
The "odd size can and carton adapter" consists of 2 pieces, both are slotted. Insert the slot of one into the slot of
the other piece so that they form a cross.
2.
To use with a gallon can, place the can on the lower container holder (#61). Place the adapter on the can (cutout
portion facing downward). Screw down #70 upper plate container holder by turning #71 handle and screw
assembly. Lock clutch by tightening #59 handle for lock screw.
3.
To use with a carton of 4 1 gallon cans, place the carton on the lower container holder (#61). Place the adapter on
the carton (flat portion facing carton, cutout portion facing upward). Screw down #70 upper plate container holder
by turning #71 handle and screw assembly. Lock clutch by tightening #59 handle for lock screw.
VII.
Instructions for requisitioning parts not identified by FSN
When requisitioning parts not identified by Federal Stock Number, it is mandatory that the following information be
furnished the supply officer:
1.
Manufacturer's Federal Supply code number: 89093.
2.
Manufacturer's part number exactly as listed herein.
3.
Nomenclature exactly as listed herein, including dimensions if necessary.
4.
Manufacturer's model number: 5033/DG
5.
Manufacturer's serial number (end item).
6.
Any other information such as type, frame number, and electrical characteristics, if applicable.
7.
If DD Form 1348 is used, fill in all blocks except 4, 5, 6 and Remarks field in accordance with AR 725-50.
Complete form as follows:
a.
In blocks 4, 5, and 6, list manufacturer's Federal Supply code number: (89093) followed by a colon and
manufacturer's part number for the repair part.
b.
Complete remarks field as follows:
Noun: (nomenclature of repair part)
For: NSN 4940-00-251-6475
Mfr:
Model: 5033/DG
Serial: (of end item)
Any other pertinent information such as frame number, type, dimensions, etc.
c.
All parts may be ordered from any of the authorized service centers on the enclosed service center list.
11
