SEMI ANNUAL or 250 HOURS
Open front top right access door per TM 5-3895-
373-10 and remove engine access cover per TM
Remove filler plug (1) and lower inspection plug
Slowly add oil at the filler hole until the oil begins
to leak from the inspection hole.
Cleaning solvent, P-D-680, Type ill, is
TOXIC and flammable.
protective goggles and gloves. Use
only in a well ventilated area. Avoid
contact with skin, eyes, and clothes,
and do not breathe vapors. Keep
away from heat or flame.
smoke when using solvent; the
flashpoint for Type III cleaning
solvent is 200F (93,3C). Failure to
do so may result in injury or death to
Clean filler plug (1) and lower inspection plug (2)
with a cleaning cloth and cleaning solvent.
Pipe sealant can cause eye damage
or skin irritation. Wash after skin
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water
and get immediate medical attention.
Apply pipe sealant to the threads of inspection
plug (2) and filler plug (1).
Install inspection plug (2) and filler plug (1).
Close front top rig ht access door per TM 5-3895-
373-10 and install engine access cover per TM
Card 21 of 28