with the other #56 bolt. Lock the two bolts with the two jam nuts, #78. When properly adjusted, there should be a
slight drag when rotating the' clamp assembly.
Turn the #55 clamp screw in so that it touches the hub #60, insert handle rod #59 and tighten set screw, #54.
Secure the container of paint in the can clamp assembly and then rotate it (can clamp assembly) to any desired
position. Lock the clutch by tightening the #55 clamp screw with the #59 handle.
MODEL 5033/DG PAINT CONDITIONER
TAKES: 1 to 5 gallon cans U.S. Standard as well as Imperial Standard. Also 1 carton of four 1 gallon cans.
BASE MEASUREMENTS: 11-3/4" wide, 19-3/4" long, 30" high. Operating space 39" x 15-1/2".
MOTOR EQUIPMENT: 1/2 H.P., 60 cycles, 115 volts, A.C., explosion-proof.
OSCILLATION: Triple three-way action.
LUBRICATION: Operates in a bath of oil that requires only occasional addition of good grade 20W SAE oil. Built-
in, glass window oil level gauge.
MOUNTING: Recommended to be secured to floor or strong portable base. Holes are bored in each of four
corners of the base.