LO 5-3895-373-12
Note 9
SEMI ANNUAL or 250 HOURS
STEERING GUIDE INDICATOR ROD
A
Loosen hex nut (1) and hex head cap screw (2).
B
Mark the position of steering guide indicator rod
(3) and fully extend the indicator rod.
WARNING
Cleaning solvent, P-D-680, Type ill, is
TOXIC and flammable.
Wear
protective goggles and gloves. Use
only in a well ventilated area. Avoid
contact with skin, eyes, and clothes,
and do not breathe vapors. Keep
away from heat or flame.
Never
smoke when using solvent; the
flashpoint for Type III cleaning
solvent is 200F (93,3C). Failure to
do so may result in injury or death to
personnel.
C
Clean all old grease from the steering guide
indicator rod (3) with cleaning solvent and a
cleaning cloth.
D
Apply GAA to the steering guide indicator rod (3)
using a brush.
E
Retract steering guide indicator rod (3) to the
marking and tighten hex head cap screw (2) and
hex nut (1).
Note 10
SEMI ANNUAL or 250 HOURS
SCREED CROWN ADJUSTMENT CONTROL
A
Fully extend extension screed and
position steps to rear per TM 5-3895-
373-10.
B
Lubricate four fittings with GAA.
Card 12 of 28
