TM 5-3820-246-14&P
d. Assembly.
(1) While holding magneto nut (l), install and
tighten crank pulley (2) 26 lb-ft (35 N-m).
(2) Insert one end of starter rope (3) through
guide in starter case (4), starter grip (5), and
stopper (6). Tie a knot in rope after stopper.
(3) Thread opposite end of starter rope (3)
through hole in starter pulley (7). Tie a knot
in end of rope.
(4) Wind rope (3) CCW (opposite normal
rotation) around starter pulley (7).
(5) Grease stem in starter case (4).
NOTE
Several attempts may be required to seat
spring ends in starter case (4) and
pulley (7).
(6) Install recoil spring (8) in starter case (4) making sure to engage spring end in starter case as noted during
disassembly.
(7) Engage spring (8) in starter pulley (7) as noted during disassembly.
4-27
