TM 5-3820-246-14&P
This task covers:
b. Installation
a. Removal
INITIAL SETUP
Equipment Condition
Tools
Condition Description
TM or Para
Tool Kit, General Mechanic's: Automotive
Fuel tank removed.
Para 4- 19
Cylinder cover removed.
Para 4- 11
Materials/Parts
General Safety Instructions
Gasket (1)
Engine retains extreme heat in operation. Allow
time for cooling before performing procedure.
Removal.
a.
(1) Remove two hose clips (1) and air hose (2).
(2) Remove four screws (3) and four
lo&washers (4) using 8 mm wrench. Discard
(3) Remove air guide (5) and gasket (6).
Discard gasket.
(4) Remove hose fitting (7) from air guide (5).
b. Installation.
(1) Install hose fitting (7) on air guide (5).
(2) Install gasket (6), air guide (5), four
lo&washers (4) and four screws (3). Tighten
screws 72 lb-in (8.5 N-m).
(3) Install air hose (2) and two hose clips (1).
NOTE
Follow-on maintenance:
Install cylinder cover (para 4-11).
Install fuel tank (para 4-19).
END OF TASK