TM 5-3820-246-14&P
Section VI. PREPARATION FOR STORAGE OR SHIPMENT
Turn fuel knob and fuel valve clockwise to off position
2-11).
a.
b.
Remove drill rod
2-8c) and place in storage box.
Perform (Q) PMCS (Table 4-1).
c.
d.
Place unit in storage box with fuel tank facing upright.
4-24. STORAGE.
a.
Turn fuel valve clockwise to off position
2-11) and allow engine to run until fuel in fuel line is exhausted
Remove all fuel from fuel tank
3-5).
b.
c.
Remove drill rod
2-8c) and place in storage box.
Clean exterior of unit
3-4).
d.
Perform (Q) PMCS (Table 4-1).
e.
Place unit in storage box with fuel tank facing upright.
f.
Take an inventory of End Item Components, and BII (see Appendix C). Report any shortages 10 your
g.
supervisor.
