TM 5-3820-246-14&P
5-10 CARBURETOR (CONT).
a. Removal.
(1)
Remove and discard two locknuts (1) using 8 mm wrench.
Remove carburetor (2), pipe joint (3), gaskets (4 and 5), and spacer (6) from carburetor box (7). Discard
(2)
gaskets and spacer.
(3) Remove throttle rod (8) from carburetor (2).
(4)
Remove three locknuts (9), three collars (10) and carburetor box (7) using 8 mm wrench, Discard locknuts
and collars.
(5) Remove carburetor gaskets (11 and 12), and plate (13). Discard gaskets.
5-22