TM 5-3820-246-14&P
(6) Measure piston ring gap while inside of
cylinder as shown on position A Normal
gap is between 0.0098 in. to 0.0177 in.
(0.25 mm and 0.45 mm). Replace piston
ring if gap greater than 0.03937 in. (1.0 mm).
(7) Clean gasket material from compressor
cylinder and mating surface on crankcase to
prevent leaks.
d. Assembly.
(1) Install piston ring (19).
(2) Install compressor piston (17) on connecting
rod (18).
(3) Install piston pin (16) and two retaining
rings (15).
5-19
