TM 5-3820-246-14&P
5-11. FRONT END ASSEMBLY (CONT).
Assembly.
c.
Never force ratchet gear in front end: apply
additional heat until it can be inserted
smoothly. Do not overheat. Damage may
result.
(1) Heat front end (4) opening and install
ratchet gear (24).
(2) Install air seal (23) into internal shaft (22).
(3) Install internal shaft (22) and clutch
wheel (21).
NOTE
Small end of trigger springs seat in dimple
on ratchet triggers.
(4) Install three trigger springs (20) and three
ratchet triggers (19) in ratchet wheel (18).
(5) Install ratchet wheel (18).
(6) Install retaining ring (16) and thrust
washer (17)
5-30
