TM 5-3820-246-14&P
Function
Key
Control or lndicator
Press button to slow engine speed. Press button all the way in
Throttle button
1
to stop engine.
Fuel Knob
Controls fuel to engine. Turn knob clockwise (CW) to stop, 10
2
shut down engine. Turn knob counterclockwise (CCW) to start
engine.
Fuel Valve
Controls fuel flow from fuel tank. Turn valve handle CW to
3
close valve and CCW to open valve.
Pull rope to start engine.
Starter Rope
4
Mode Selector
Turn selector so that "D" on selector tab is in the upright
5
position for drill mode. Turn selector so that "B" on selector tab
is in the upright position for impact (breaking) mode.
Section II. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
2-3. GENERAL.
To ensure that the Paving Breaker is ready for operation at all times, it must be inspected systematically so that defects
mat be discovered and corrected before they result in serious damage or failure. Table 2-2 contains a tabulated listing
of preventive maintenance checks and and services 10 be performed by the operator.
2-4. WARNINGS AND CAUTIONS.
Always observe the warnings and cautions appearing in the PMCS table. Warnings and cautions appear before
applicable procedures. Warnings and cautions must be observed to prevent serious injury to yourself and others or
prevent equipment from being damaged.
