TM 5-3895-376-14&P
5-8. CYLINDER HEAD MAINTENANCE INSTRUCTIONS
This task includes:
a. Remove/Disassemble
b. Cleaning
c. Inspection
d. Repair
f. Assemble/Installation
INITIAL SETUP
Tools
Tool Kit, General Mechanic’s
Wrench, Torque; item 52, Appx F
Materials/Parts
Solvent, Dry Cleaning; item 9, Appx E
Oil, Lubricating; item 6, Appx E
Packing, Preformed (1)
Locknut, M5 (2)
Equipment Conditlon
Compactor set on level ground in a protected area.
Engine off.
General Safety Instructions
Observe all WARNINGS and CAUTIONS
REMOVE/DISASSEMBLE
1.
2.
3.
4.
5.
6.
7.
8.
9.
10
11.
Remove air cleaner (Para. 4-27).
Remove muffler (Para. 4-31).
Remove valve cover (Para. 4-33).
Disconnect high pressure fuel line and
return line from fuel injector (Para. 4-29).
Remove fuel injector (Para. 5-4).
Remove rocker arms and push rods
(Para. 5-7).
Remove the two lock nuts (1), flat wash-
ers (2), and retaining spring (3).
Remove four hex nuts (4), flat washers (5)
and lift bracket (6).
Remove the cylinder head (7) from top of the
cylinder.
Remove push rod tube (8) and preformed
packing (9) from cylinder head (7).
If cylinder head is to be replaced remove the
valves (Para. 5-9).
5-16
