TM 5-3895-376-14&P
4-27. AIR CLEANER MAINTENANCE INSTRUCTIONS
This task includes:
a Remove
b Disassembly
c Cleaning
d. Inspection
e Repair
f Assembly
g. lnstallation
INlTIAL SETUP
Tools
Tool Kit. General Mechanic’s
Materials/Parts
Solvent Dry Cleaning item 9, Appx E
Rag, Wiping item 8, Appx E
Element, Air Cleaner (1)
Gasket (2)
Equipment Condition
Compactor set on level ground in protected area.
Engine off.
General Safety Instructions
Observe all WARNINGS and CAUTIONS
W A R N I N G
If NBC exposure is suspected. all filter
media should be handled by personnel
wearing protective equipment. Consult
your unit NBC Officer or NBC NCO for
appropriate handling or disposal proce-
dures.
1
Remove two hex nuts (1).
2. Grasping the air cleaner (2) around the center
housing, pull the air cleaner off the studs (3 and
4).
3. Remove the two gaskets (5).
4. If either stud (3 or 4) is bent or damaged, remove
the stud from cylinder head.
1. Remove wing nut (1) and lift off cover (2).
2. Lift off the pot (3).
3. Lift off the air intake ring (4).
4-48
4
Remove the base ring (5)
3
Release the two retaining clips (6). Lift the hous-
ing (7) from top of the cup (8).
