TM 5-3895-376-14&P
5-14. GEAR COVER MAINTENANCE INSTRUCTIONS - Continued
11. Install new gasket (10) and drain flange (9), se-
curing with two capscrews (7) and copper wash-
ers (8). Tighten capscrews securely.
18. Install the valve cover (Para. 4-33).
19. Install the crank handle guide assembly
(Para. 4-20).
12. Install drain plug (5) and copper washer 6).
20. Install the dipstick (Para. 4-16).
13. Adjust the governor control shaft (Para. 5-16).
14. Install new gasket (4) and cover plate (3), secur-
ing with two capscrews (1) and copper wash-
ers (2). Tighten the capscrews securely.
21. If removed, install the oil filler cap (Para. 4-15).
22. Connect the throttle control cable to the throttle
control lever and engine bracket (Para. 4-18).
15. Install the compression release (Para. 5-10).
23. Adjust the throttle control cable (Para. 4-18).
16. Install the rocker arm assemblies and push rods
(Para. 5-7).
17. If removed, install fuel lines (Para. 4-29).
NOTE
Follow-on tasks include: Service the en-
gine.
5-40
