TM 5-3895-376-14&P
4-21. TRANSPORT DOLLY MAINTENANCE INSTRUCTIONS - Continued
f.
Remove rubber spring element (19) from
bracket.
W A R N I N G
P-D-680, Type III, Is moderately toxic to
the skin, eyes and respiratory tract;
avoid prolonged exposure. Skin and
eye protection is required. Good ventila-
tion is required. Do not use near open
flame or excessive heat. Flash point is
200 degrees F (93.3 degrees C).
g.
Clean parts to be reinstalled with cloth damp-
ened with cleaning solvent and dry thor-
oughly.
h.
install capscrew (9) with flat washer (10) into
rubber spring element (19).
i.
Seat the rubber spring element into bracket
(7) and position bracket up under the guide
bar so that threads of capscrew (9) extend to
the right side of plate compactor. Secure
bracket with two capscrews (16, 17), flat
washers (18), lockwashers (15) and nuts (14).
4-33
