TM
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
TM or Para
Condition Description
Para 4-11
Cylinder cover removed.
Materials/Parts
General Safety Instructions
Exhaust pipe retains extreme heat in operation.
Locknuts (3)
Allow time for cooling before performing
Gasket (1)
procedure.
a.
Removal.
(1) Remove and discard three locknuts (1)
using 13 mm wrench.
(3) Remove exhaust pipe (3) and gasket (4).
Remove and discard all gasket material.
b.
Installation.
(1) Install gasket (4).
(2) Install exhaust pipe (3).
(3) Install three lo&washers (2) and three
locknuts (1). Tighten 26 lb-ft (35 N-m).
NOTE
Follow-on maintenance: Install cylinder cover (para 4-11).
END OF TASK
4-29