TM 5-3820-246-14&P
This task covers:
c. Assembly
a. Removal
b. Disassembly
d. Installation
INITIAL SETUP
Tools
Equipment Condition
TM or Para
Tool Kit, General Mechanic's: Automotive
Condition Desciption
Para 4-18
Air cleaner cover
removed (part of air
Materials/Parts
cleaner removal).
Lockwasher (1)
Rubber seals (2)
Rubber packing (1)
Gaskets (4)
Handle grips (2)
Bushing (1)
Compound, Sealing: item 2, Appendix E
a.
Removal.
(1) Loosen setscrew using 2 mm socket head
screw key and remove throttle knob (1).
(2) Remove nut (2) using 8 mm wrench.
(3) Remove lo&washer (3), and fuel knob (4)
Discard lock-washer.
(4) Remove nuts (5) using 13 mm socket.
(5) Remove handle boss assembly (6).
b. Disassembly.
NOTE
Remove handle grips or bushing only if
they are found to require replacement after
inspection.
(1) If necessary, remove two handle grips (7)
and handle pipe (8). Discard grips.
(2) If necessary, remove bushing (9) from handle boss (6). Discard bushing.
4-31